{"title":"Braces and Bumpers","description":null,"products":[{"product_id":"1tenth-axial-ryft-high-clearance-front-brace-1tn-xl-ryf-hgh","title":"1Tenth - Aluminum Ryft High Clearance Front Brace","description":"\u003cp\u003eSame model as the Nylon Version but in aluminum. In my effort to get the Ryft low without the chassis hitting everywhere I whipped up a new front brace to accommodate.\u003c\/p\u003e\n\u003cp\u003eThis is NOT a bolt in and be done kind of part. You'll need to trim the battery tray back and cut the front nose pieces out.\u003c\/p\u003e\n\u003cp\u003eI also made some custom bent links to clear the rest of the battery tray. This piece lets me get the chassis hitting the back of the pumpkin. Braces between underside of body post mounts, side of chassis, and battery tray. 4 of the holes need to be threaded for m3. \u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: AlSi10Mg\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~34g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-24mm\u003c\/li\u003e\n\u003cli\u003eW-79mm\u003c\/li\u003e\n\u003cli\u003eH-58mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Default Title","offer_id":45467897430331,"sku":"1TN-RyftFrntBrce-Al","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/products\/152FF29E-74BA-4526-A9C1-945752D46437.jpeg?v=1687224584"},{"product_id":"1tenth-high-clearance-rear-brace-with-fuel-cell-for-axial-ryft","title":"1Tenth- High Clearance Rear Brace with Fuel Cell for Axial Ryft","description":"\u003cp\u003eWhen you want to get low with the Ryft lots of chassis parts get in the way.\u003c\/p\u003e\n\u003cp\u003eThe rear brace and the fuel cell being one of those pieces. I raised it up as much as we could at the back of the chassis and shrunk the fuel cell a good bit. After that I figured might as well add some limit strap mounts.\u003c\/p\u003e\n\u003cp\u003eThe fuel cell is big enough for the stock. Similar to the HD version (pictured with it) but less pipes for less $$. Lid will be attached to fuel cell and need to be cut off, like treed parts. Small white\/grey dots may be present after cutting. Sharpie can fix it.\u003c\/p\u003e\n\u003cp\u003eIf you're full send 24x7x365 Id suggest the HD version which is shown next to standard\u003c\/p\u003e\n\u003cp\u003eYou'll need - 3 x M3x6 for lid 6 x M3x12 for limit strap mounts (2X minimum but all spots filled is strongest. Snug, then half a turn) 2 x M3x10 for rear cage to brace\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: PA12\u003c\/li\u003e\n\u003cli\u003eManufactring: SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~23g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-92mm\u003c\/li\u003e\n\u003cli\u003eW-53mm\u003c\/li\u003e\n\u003cli\u003eH-26mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Black","offer_id":51395834020155,"sku":"1TN-Ryft-HCRrBrc-1","price":17.99,"currency_code":"USD","in_stock":true},{"title":"Off White","offer_id":51395834052923,"sku":"1TN-Ryft-HCRrBrc-2","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/products\/IMG_6277.jpg?v=1710471572"},{"product_id":"1tenth-anti-turtle-top-for-axial-ryft-1tn-nt-trt-top","title":"1Tenth - HD Anti Turtle Top for Axial Ryft","description":"\u003cp\u003e1Tenth - HD Anti Turtle Top for Axial Ryft\u003c\/p\u003e\n\u003cp\u003eAxial designed a great lookin chassis but it has a tendency to get stuck on its flat roof. The Axial Capra had the same issue and I solved that with a similar idea and got on the podium, in bouncer class, a few times with it. This one is a similar idea just a lot beefier than the Capra version.\u003c\/p\u003e\n\u003cp\u003eCompared to the standard version this one is manufactured with a different material, Nylon 6, and a different process.  Standard version is Selective Laser Sintering and this one is Fused Deposition modeling.  CNC Laser vs CNC squirty plastic. Finish isn't quite as nice as the SLS and the underside has signs of the supports used during print.\u003c\/p\u003e\n\u003cp\u003eThis one is much less rigid and up to taking bigger impacts and very close to stock chassis flex.  That impact strength means its not as rigid as the standard version and slightly behind the OEM materials.\u003c\/p\u003e\n\u003cp\u003eThe original version has been on many podiums and survived entire seasons of racing on team driver rigs but one big air driver broke a couple standards. If you're a full send kind of person this version will hold up to abuse significantly better.\u003c\/p\u003e\n\u003cp\u003eThis part replaces the entire roof piece with a design geared towards helping you roll back over. The top center is raised about 20MM to make rocking back and forth easier. I also tried to make sure side to side would be a little easier too while making it as beefy as possible.\u003c\/p\u003e\n\u003cp\u003eDoes it work? In a lot of scenarios it will make it a lot easier to roll back over. In tall grass, mud, and, other really soft surfaces It might not be as effective. If you're in a spot where you can't touch your rig it can make starting a back and forth rock a whole lot easier though. \u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: PA6\/CF15\u003c\/li\u003e\n\u003cli\u003eManufacturing: FDM\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: 60g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-178mm\u003c\/li\u003e\n\u003cli\u003eW-105mm\u003c\/li\u003e\n\u003cli\u003eH-41mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBackorder is turned on since this is manufactured in house.   If it's out of stock there shouldn't be more than a 3-5 business day delay in shipping.\u003c\/p\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Default Title","offer_id":49033891021115,"sku":"1TN-Ryft-HDTrtlTop-1","price":25.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/files\/20240621-145010.jpg?v=1718999774"},{"product_id":"1tenth-ryft-skid-high-clearance-skid-with-aluminum-sides","title":"1Tenth -High Clearance Skid with Aluminum Sides for Ryft","description":"\u003cp\u003eAfter multiple revisions and months of testing by team drivers.... 1Tenth High Clearance skid for the Axial Ryft platform is designed to give you better performance and more options.\u003c\/p\u003e\n\u003cp\u003eWith semi centered and wide lower link mount options for both front and rear you can get your rig dialed in just the way you like it including using a leading arm setup. Or for the crawlers you can triangulate a little more and utilize some high clearance links with axle mounted shocks. Lots of options...\u003c\/p\u003e\n\u003cp\u003eThe transmission mounts ~2MM higher than stock position and keeps about the same amount of room for the motor. To accommodate larger motors you can add the optional parts tree that will come with risers for the transmission and some fillers for any unused lower links mounts.\u003c\/p\u003e\n\u003cp\u003eThe bottom of the skid sits flush with the bottom of the chassis. The skid has provisions for the factory receiver box but its NOT in the same position as stock. If you intend to use the received box you'll need to do some DIY'ing to get everything to fit.\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: PA12 and AlSi10Mg\u003c\/li\u003e\n\u003cli\u003eManufactring: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: TBD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-TBD\u003c\/li\u003e\n\u003cli\u003eW-TBD\u003c\/li\u003e\n\u003cli\u003eH-TBD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOrder comes with Nylon Center Skid and 2 x Aluminum Outer Plates and 90 day warranty.\u003c\/p\u003e\n\u003cp\u003eWorking on hardware kits but nothing too special needed. Some minor clearance or tweaking may be necessary depending on your chassis or suspension\/link setup.\u003c\/p\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Default Title","offer_id":47969767326011,"sku":"1TN-RyftSkd","price":59.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/products\/blob-d180f59.png?v=1710471881"},{"product_id":"1tenth-70mm-anodized-aluminum-chassis-brace","title":"1Tenth - 70MM Anodized Aluminum Chassis Brace","description":"\u003cp\u003e1Tenth - 70MM Anodized Aluminum Chassis Brace\u003c\/p\u003e\n\u003cp\u003e70MM wide anodized aluminum chassis braces with threaded ends. Perfect for light weight bracing to keep weight down low while eliminating chassis flex.\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: 6061 Aluminum\u003c\/li\u003e\n\u003cli\u003eManufacturing: CNC\u003c\/li\u003e\n\u003cli\u003eFinish: Anodized\u003c\/li\u003e\n\u003cli\u003eWeight: ~3g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-5mm\u003c\/li\u003e\n\u003cli\u003eW-70mm\u003c\/li\u003e\n\u003cli\u003eH-5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePurchase comes with one brace by default\u003c\/p\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Red","offer_id":47969773519163,"sku":"1TN-70M-NDZ-LMN-RED","price":1.99,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":47969773551931,"sku":"1TN-70M-NDZ-LMN-BLC","price":1.99,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":47969773584699,"sku":"1TN-70M-NDZ-LMN-BL","price":1.99,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":47969773650235,"sku":"1TN-70MMChsBrc-RNG","price":1.99,"currency_code":"USD","in_stock":true},{"title":"Green","offer_id":47969773683003,"sku":"1TN-70MMChsBrc-GRN","price":1.99,"currency_code":"USD","in_stock":true},{"title":"Purple","offer_id":49250969223483,"sku":"1TN-70M-NDZ-LMN-RED","price":1.99,"currency_code":"USD","in_stock":true},{"title":"Clear","offer_id":49609258303803,"sku":"1TN-70M-NDZ-LMN-RED","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/products\/IMG_1430.jpeg?v=1710471999"},{"product_id":"1tenth-hd-anti-turtle-top-for-axial-ryft","title":"1Tenth - Anti Turtle Top for Axial Ryft","description":"\u003cp\u003e1Tenth - HD Anti Turtle Top for Axial Ryft\u003c\/p\u003e\n\u003cp\u003eAxial designed a great lookin chassis but it has a tendency to get stuck on its flat roof. The Axial Capra had the same issue and I resolved that with a similar idea and got on the podium, in bouncer class, a few times. This one is just a lot beefier than the Capra version.\u003c\/p\u003e\n\u003cp\u003eThe top has been on many podiums and survived entire seasons of racing on team driver rigs. But it has its limits. Manufactured from nylon12 with glass fiber it's more rigid than stock and my HD version and has a nicer finish.  Has no issues dealing with rolls and tumbles down hills.\u003c\/p\u003e\n\u003cp\u003eIf you're a full send kind of person who gets big air a lot, I'd suggest the HD version.\u003c\/p\u003e\n\u003cp\u003eThis part replaces the entire roof piece with a design geared towards helping you roll back over. The top center is raised about 20MM to make rocking back and forth easier. I also tried to make sure side to side would be a little easier too while making it as beefy as possible.\u003c\/p\u003e\n\u003cp\u003eDoes it work? In a lot of scenarios it will make it a lot easier to roll back over. In tall grass, mud, and, other really soft surfaces It might not be as effective. If you're in a spot where you can't touch your rig it can make starting a back and forth rock a whole lot easier though.\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: PA12\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: 60g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-178mm\u003c\/li\u003e\n\u003cli\u003eW-105mm\u003c\/li\u003e\n\u003cli\u003eH-41mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eComes in black or a offwhite and black but can be dyed any color you like using Ritt dye.\u003c\/p\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Off White","offer_id":49885072556347,"sku":null,"price":29.99,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":49885073047867,"sku":null,"price":29.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/files\/20240424-230929_1c9b1593-ab75-499d-8303-62e35b89fcf8.jpg?v=1718999793"},{"product_id":"1tenth-high-clearance-skid-for-axial-capra-and-3-gear-transmission","title":"1Tenth - High Clearance Skid for Axial Capra and 3 Gear transmission","description":"\u003cp\u003eThe Capra is a great rig with good breakover but a smooth belly can make it even better.  Same goes for the stock transmission - it's not horrible but it's geared a bit high and has limited options for gearing.\u003c\/p\u003e\n\u003cp\u003eThis skid ditches the stock transmission in favor of the tried and true Axial 3 gear transmission.  It also makes the bottom of the skid flush with bottom of the chassis.  This allows you to droop the rig a little more while maintaining breakover.\u003c\/p\u003e\n\u003cp\u003eStock link geometry for the most part just slightly adjusted for raised bottom.\u003c\/p\u003e\n\u003cp\u003eSkid is a 3 piece design manufactured in the US from Nylon6. \u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: PA6\/CF15\u003c\/li\u003e\n\u003cli\u003eManufacturing: FDM\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~40g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIntended for experienced builders.  Some custom parts like driveshafts or screws may be needed for conversion to 3 gear.\u003c\/p\u003e\n\u003c!----\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Default Title","offer_id":48970307109179,"sku":"1TN-Capra-HCSkid3Gear","price":25.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/files\/IMG_4517.jpg?v=1718225722"},{"product_id":"1tenth-aluminum-redcat-gen9-ascent-bumper-mount","title":"1Tenth - Aluminum Bumper Mount for Redcat Ascent","description":"\u003cp\u003eThis bumper mount and chassis brace provides all the clearance you need to do a 4 Link with SOA setup.  The stock brace\/mount will hit the servo and once enough is cutout it's not very sturdy.\u003c\/p\u003e\n\u003cp\u003eCompatible with OEM and 1Tenth Gen9\/Ascent bumpers.\u003c\/p\u003e\n\u003cp\u003eCan be used in the front or rear of the chassis but does not have the pivot mount for the front.\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: AlSi10Mg\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~13g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-20mm\u003c\/li\u003e\n\u003cli\u003eW-70mm\u003c\/li\u003e\n\u003cli\u003eH-16mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Default Title","offer_id":49513191735611,"sku":"","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/files\/IMG_5533.jpg?v=1727134654"},{"product_id":"1tenth-aluminum-redcat-ascent-bumper-mount-w-tilt","title":"1Tenth - Aluminum Bumper Mount w\/ Tilt for Redcat Ascent","description":"\u003cp\u003eThis bumper mount and chassis brace provides all the clearance you need to do a 4 Link with SOA setup.  The stock brace\/mount will hit the servo and once enough is cutout it's not very sturdy.\u003c\/p\u003e\n\u003cp\u003eCompatible with OEM and 1Tenth Gen9 bumpers.\u003c\/p\u003e\n\u003cp\u003eDesigned for the front of the chassis but technically fits the rear as well if you want to get creative with something.\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: AlSi10Mg\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~18g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-32mm\u003c\/li\u003e\n\u003cli\u003eW-70mm\u003c\/li\u003e\n\u003cli\u003eH-26mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Default Title","offer_id":49513193111867,"sku":null,"price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/files\/IMG_5537.jpg?v=1727135057"},{"product_id":"1tenth-hd-anti-turtle-top-for-axial-capra-utb","title":"1Tenth - HD Anti Turtle Top for Axial Capra UTB","description":"\u003cp\u003e1Tenth - Anti Turtle Top for Axial Capra UTB\u003c\/p\u003e\n\u003cp\u003eSame design as the standard version but printed with a more flexible nylon so it's more impact resistant.  The downside is the finish isn't quite as good.  It's the version in the pic and a single top has help up to 2+ years of abuse and gotten me on a few bouncer comp podiums.\u003c\/p\u003e\n\u003cp\u003eIf you're using your Capra as a bouncer with no hand of god allowed during races, want a little extra turtle protection, or just want to customize your Capra, you need this. \u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: PA6\/CF15\u003c\/li\u003e\n\u003cli\u003eManufacturing: FDM\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~30g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-150mm\u003c\/li\u003e\n\u003cli\u003eW-118mm\u003c\/li\u003e\n\u003cli\u003eH-48mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUses all stock mounts so it's still a bolt on affair, aside from the roof body panel.  That won't fit anymore without some heat forming or cutting.\u003c\/p\u003e\n\u003cp\u003eDoes it work? In a lot of scenarios it will help you rock to your wheels easier. Soft and deep surfaces won’t be quite as effective.\u003c\/p\u003e\n\u003cp\u003eManufactured using FDM printers from carbon or glass fiber Nylon 12 depending on availability.\u003c\/p\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Default Title","offer_id":49570058633531,"sku":null,"price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/products\/C8CDD858-B339-4355-BEDB-C37453B0FE52.jpeg?v=1710471597"},{"product_id":"1tenth-aluminum-anti-turtle-top-for-axial-ryft","title":"1Tenth - Aluminum Anti Turtle Top for Axial Ryft","description":"\u003cp\u003e1Tenth - Aluminum Anti Turtle Top for Axial Ryft\u003c\/p\u003e\n\u003cp\u003eAxial designed a great lookin chassis but it has a tendency to get stuck on its flat roof. The Axial Capra had the same issue and I solved that with a similar idea and got on the podium, in bouncer class, a few times with it. This one is a similar idea just a lot beefier than the Capra version.\u003c\/p\u003e\n\u003cp\u003eThis part replaces the entire roof piece with an aluminum section designed towards helping you roll back over. The top center is raised about 20MM to make rocking back and forth easier. I also tried to make sure side to side would be a little easier too while making it as beefy as possible.\u003c\/p\u003e\n\u003cp\u003eDoes it work? In a lot of scenarios it will make it a lot easier to roll back over. In tall grass, mud, and, other really soft surfaces It might not be as effective. If you're in a spot where you can't touch your rig it can make starting a back and forth rock a whole lot easier though. \u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: AlSi10MG\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~113g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-178mm\u003c\/li\u003e\n\u003cli\u003eW-105mm\u003c\/li\u003e\n\u003cli\u003eH-41mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Default Title","offer_id":49847781687611,"sku":null,"price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/files\/Studio-Project_1.png?v=1735601285"},{"product_id":"1tenth-aluminum-bumper-for-redcat-ascent","title":"1Tenth - Aluminum Bumper for Redcat Ascent","description":"\u003cp\u003eMinimalist triple bar design for maximum performance.  Can be mounted in OEM or 1Tenth bumper mount. \u003c\/p\u003e\n\u003cp\u003eWorks with body flip design no problems, like stock but better.  Can be used in front or rear.\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: AlSi10MG\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~28g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-32mm\u003c\/li\u003e\n\u003cli\u003eW-102mm\u003c\/li\u003e\n\u003cli\u003eH-15mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Default Title","offer_id":50680462639419,"sku":null,"price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/files\/IMG-9468.heic?v=1761580448"},{"product_id":"copy-1tenth-aluminum-bumper-for-redcat-ascent","title":"1Tenth - Aluminum Bumper V2 for Redcat Ascent","description":"\u003cp\u003eA little less minimalist design this one incorporates some winching and recovery goodies.  Can be mounted in OEM or 1Tenth bumper mount. \u003c\/p\u003e\n\u003cp\u003eAddition of the fairlead hinders the flip body a little but some trimming or heat assisted fitment can resolve that.  \u003c\/p\u003e\n\u003cp\u003eBumper Only - no hooks or rings included\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: AlSi10MG\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~29g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-36mm\u003c\/li\u003e\n\u003cli\u003eW-103mm\u003c\/li\u003e\n\u003cli\u003eH-22mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBlack is an epoxy based paint.  Easy touch up for scratches.\u003c\/p\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Black","offer_id":50680472535355,"sku":null,"price":31.99,"currency_code":"USD","in_stock":false},{"title":"Granular Aluminum","offer_id":50680472568123,"sku":null,"price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/files\/IMG-9469.heic?v=1761580872"},{"product_id":"1tenth-aluminum-bumper-v3-for-redcat-ascent","title":"1Tenth - Aluminum Bumper V3 for Redcat Ascent","description":"\u003cp\u003e1Tenth Aluminum bumper v3 for Redcat Ascent. Fairlead and a stinger on this one gives your rig that custom look and keeps it light.  \u003c\/p\u003e\n\u003cp\u003eDoes not work with body flip design.  Can still sort of get to batteries and some interior but not a full flip up.\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: AlSi10MG\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~34g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-33mm\u003c\/li\u003e\n\u003cli\u003eW-103mm\u003c\/li\u003e\n\u003cli\u003eH-54mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Default Title","offer_id":50680474304827,"sku":null,"price":34.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/files\/IMG-9458.heic?v=1761581639"},{"product_id":"1tenth-aluminum-bumper-for-scx10-pro","title":"1Tenth - Aluminum Bumper for SCX10 Pro","description":"\u003cp\u003eLightweight and strong this bumper is a direct swap for the stock bumper.\u003c\/p\u003e\n\u003cp\u003eMaintains excellent approach angle, adds a stinger, and a fairlead for some scale touches.\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: AlSi10MG\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~25g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-30mm\u003c\/li\u003e\n\u003cli\u003eW-84mm\u003c\/li\u003e\n\u003cli\u003eH-53mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Default Title","offer_id":50680563171643,"sku":null,"price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/files\/IMG-9476.heic?v=1761588978"},{"product_id":"70mm-chassis-brace-with-adjustable-carrier-bearing","title":"70MM Chassis Brace with Adjustable Carrier Bearing","description":"\u003cp\u003eWhether you have just have a long rear or need to increase ground clearance, this adjustable carrier bearing will get the job done.\u003c\/p\u003e\n\u003cp\u003e5MM input and output that can be slid left or right to get the angle perfect.\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Aluminum and Steel\u003c\/li\u003e\n\u003cli\u003eManufactring: CNC\u003c\/li\u003e\n\u003cli\u003eFinish: Anodized\u003c\/li\u003e\n\u003cli\u003eWeight: ~14g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Grey","offer_id":50922336878907,"sku":null,"price":10.99,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":50922336911675,"sku":null,"price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/files\/IMG-0407.heic?v=1768800583"}],"url":"https:\/\/1tenth.com\/collections\/braces-and-bumpers.oembed","provider":"1Tenth Scale RC","version":"1.0","type":"link"}