{"title":"Redcat","description":null,"products":[{"product_id":"boco-redcat-portal-soa-for-v1-or-v2-axles","title":"BOCO RC - Stainless SOA for Gen8 \/ Gen7 Redcat Portals V1 or V2","description":"\u003cp\u003eThis piece allows you to mount a servo as low as possible on the Redcat V1 or V2 Portal axle and convert over to a 4 Link setup to totally eliminate bump steer and axle sway.\u003c\/p\u003e\n\u003cp\u003eIt slips over the top of the pumpkin and uses the front diff cover screws for bracing as well as the link mount on the diff. Manufactured from Stainless Steel it'll easily outlast the rest of your rig.\u003c\/p\u003e\n\u003cp\u003eIf you want a raw stainless look you can use a wire wheel or other light abrasive to remove the top granular layer. \u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: 316L Stainless Steel\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~34g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-29mm\u003c\/li\u003e\n\u003cli\u003eW-56mm\u003c\/li\u003e\n\u003cli\u003eH-33mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIncludes hardware required for installation on the axle. \u003c\/p\u003e\n\u003cp\u003eYou'll need to provide a 2nd upper link.\u003c\/p\u003e\n\u003cp\u003eBlack version is an epoxy based paint.\u003c\/p\u003e","brand":"BOCO RC","offers":[{"title":"Black","offer_id":50449460789563,"sku":"BC-RDC-PRT-SOA-1","price":32.99,"currency_code":"USD","in_stock":false},{"title":"Granular Steel","offer_id":50449460822331,"sku":"BC-RDC-PRT-SOA-2","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/files\/IMG_2149.jpg?v=1782794416"},{"product_id":"boco-stainless-truss-with-servo-mount-for-redcat-v2-portals","title":"BOCO RC - Steel SOA with Truss for Redcat Gen8 V2 Portals","description":"\u003cp\u003eBOCO RC - Stainless Truss with Servo Mount for Redcat Gen 8 V2 Portals.\u003c\/p\u003e\n\u003cp\u003eForm fit design with 3 mount points will make your axle housing stout. The extra ~40g will help a lot lowering center of gravity. Not intended for stock chassis. It can be done but is a bit of work. \u003c\/p\u003e\n\u003cp\u003eComes with necessary hardware to mount on the axle. You'll need some screws and nuts for the actual servo.\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: 316L Stainless Steel\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~42g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-28mm\u003c\/li\u003e\n\u003cli\u003eW-84mm\u003c\/li\u003e\n\u003cli\u003eH-41mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll BOCO RC servo mounts are manufactured from 316l stainless steel, using DMLS or SLS additive manufacturing, and come with a lifetime warranty against cracks or breaks.\u003c\/p\u003e","brand":"BOCO RC","offers":[{"title":"Default Title","offer_id":45467887567163,"sku":"BOCO-TRUSS-RDCTPRTL","price":35.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/products\/blob-0004.png?v=1687224409"},{"product_id":"boco-stainless-soa-for-redcat-xr247","title":"BOCO RC - Steel SOA for Redcat Wendigo Axles XR247","description":"\u003cp\u003eBOCO RC - Stainless Steel SOA and 4 Link adapter for Redcat XR247 axles on the Wendigo.\u003c\/p\u003e\n\u003cp\u003eBased on the same model as the proven Nylon SOA this one is for the full send or max weight people. The heaviest servo mount out of my lineup it adds about 52g down low. More weight = more cost though...\u003c\/p\u003e\n\u003cp\u003eThe extra space in the middle of the upper link mounts means you won't need a long M3x60 for the upper links. Some common length screws will do.\u003c\/p\u003e\n\u003cp\u003eYou’ll need to add a screw hole on the top of the truss on the drivers side and use a 2mm longer screw on the top of the truss on the passenger side.\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: 316l Stainless Steel\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~52g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-26mm\u003c\/li\u003e\n\u003cli\u003eW-70mm\u003c\/li\u003e\n\u003cli\u003eH-34mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBlack option is painted.  If you want a more durable or custom color you can powder coat or Cerakote. \u003c\/p\u003e","brand":"BOCO RC","offers":[{"title":"Black","offer_id":50285079626043,"sku":"BOCO-SOA-XR247","price":35.99,"currency_code":"USD","in_stock":true},{"title":"Granular Steel","offer_id":50467355590971,"sku":null,"price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/products\/05D78095-D476-481C-8D60-FD6222AE4D56.jpeg?v=1710737263"},{"product_id":"soa-for-redcat-portal-axle-v1-v2-2","title":"1Tenth - Aluminum SOA for Redcat Gen8 \/ Gen7 Portals V1 or V2","description":"\u003cp\u003eServo On Axle and 4 link adapter for Gen 7 and Gen 8 Portal Axles.  Fits V1 and V2\u003c\/p\u003e\n\u003cp\u003eIf you're sick of bump steer and axle sway with the 3 link panhard setup this is for you!  Slips right on top of the pumpkin and uses 3 of the diff cover screws to secure it.\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: AlSi10Mg\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~13g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-30mm\u003c\/li\u003e\n\u003cli\u003eW-56mm\u003c\/li\u003e\n\u003cli\u003eH-34mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot intended for use on stock chassis Gen8 as the motor gets in the way and there's no provisions for a 2nd upper front link on the chassis side. It HAS been done but not an easy bolt on affair. Intended for light to medium weight rigs with moderate power servos.\u003c\/p\u003e\n\u003cp\u003eEasy bolt on for Gen7 and most aftermarket flat rail chassis.\u003c\/p\u003e\n\u003cp\u003eIncludes hardware to mount on the axle. You'll need some screws for the actual servo.\u003c\/p\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Black","offer_id":50922160521531,"sku":"1TN-SOA-ALGen8Prtl-1","price":25.99,"currency_code":"USD","in_stock":false},{"title":"Granular Aluminum","offer_id":50922160554299,"sku":"1TN-SOA-ALGen8Prtl-2","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/products\/IMG_0938.jpeg?v=1707764287"},{"product_id":"1tenth-soa-and-4-link-adapter-for-redcat-xr247-1","title":"1Tenth - SOA for Redcat Wendigo \/ XR247 Axles","description":"\u003cp\u003eServo On Axle and 4 Link adapter for Redcat XR247 axles is manufactured from Nylon 12 using Selective Laser Sintering\u003c\/p\u003e\n\u003cp\u003eWhile not as bad as the Gen8 axles the 3 link geometry isn't ideal on the XR247s. Eliminate bump steer and axle sway all while improving center of gravity.\u003c\/p\u003e\n\u003cp\u003eComes with M3 screw to secure upper links. You'll need a 2mm longer screw on passenger side of the truss and a M3x~6MM to secure SOA on driver side of truss.\u003c\/p\u003e\n\u003cp\u003eMUST make a hole for the screw on the top driver side of truss. Install truss loosely to use as template for hole.\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: PA12\u003c\/li\u003e\n\u003cli\u003eManufacturing:  SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~15g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-26mm\u003c\/li\u003e\n\u003cli\u003eW-71mm\u003c\/li\u003e\n\u003cli\u003eH-33mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot intended for use on a stock chassis Wendigo\u003c\/p\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Default Title","offer_id":47969676394811,"sku":"1TN-SOA-RedcatXR247","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/products\/IMG_2012_5d77a90e-2d7b-4b73-867f-6b701ce5999d.jpg?v=1710470813"},{"product_id":"boco-stainless-truss-for-redcat-portal-v2-bc-stn-trs-for","title":"BOCO - Steel Truss w Link Riser for Redcat Gen8 Portals V2","description":"\u003cp\u003eBOCO - Stainless Truss with Link Riser for Redcat Portal V2\u003c\/p\u003e\n\u003cp\u003eDesigned to help take stress off the plastic housing with multiple attachment points and add some antisquat tuning options. Not compatible with the V1 Portals.\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: 316L Stainless\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~26g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-83mm\u003c\/li\u003e\n\u003cli\u003eW-25mm\u003c\/li\u003e\n\u003cli\u003eH-13mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eComes with all hardware to mount on the axle\u003c\/p\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Default Title","offer_id":47969727807803,"sku":"BOCO-Redcat-TrussRrLnkRsr","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/products\/A488E86A-E0F3-4E50-9626-295D535802D9.jpeg?v=1710471622"},{"product_id":"1tenth-aluminum-roof-rack-1","title":"1Tenth - Aluminum Light Weight Roof Rack","description":"\u003cp\u003e1Tenth - Aluminum Light Weight Roof Rack Light Weight Comp style roof rack designed to be just strong enough and keep weight as low as possible.\u003c\/p\u003e\n\u003cp\u003e3.8MM tall on the edges with inset corner braces. Plenty of screw holes for mounting options or pivot system mounting. You'll need to supply the mounting hardware due to the options with bodies but holes are sized for M3 hardware. \u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: AlSi10Mg\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~19g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-97mm\u003c\/li\u003e\n\u003cli\u003eW-69mm\u003c\/li\u003e\n\u003cli\u003eH-4mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you prefer more shine to the aluminum you can use a wire wheel or other light abrasive to remove the top granular layer.\u003c\/p\u003e\n\u003cp\u003eOptional colors are epoxy based paint.  For more durable coatings you can send off for powder or Cerakote.\u003c\/p\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Granular Aluminum","offer_id":49848372756795,"sku":"1TN-AlLghtWghtRfRk-2","price":17.99,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":50459434484027,"sku":null,"price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/files\/IMG-8750.heic?v=1754425084"},{"product_id":"1tenth-servo-on-axle-mount-redcat-ascent-gen9-axle","title":"1Tenth - Aluminum SOA for Redcat Ascent \/ Gen9 Axles","description":"\u003cp\u003e1Tenth - Servo Mount and 4 Link Adapter for Redcat Ascent and Gen9 Axles\u003c\/p\u003e\n\u003cp\u003eRedcat did make some improvements to bump steer on the Gen9 and Ascent but it's still there, as it always will be with a 3 link and panhard. That's why 4 link is so much better.\u003c\/p\u003e\n\u003cp\u003eSo here is the servo mount to get you up the hills quicker than the CMS rigs. Manufactured from aluminum so it's light and strong.\u003c\/p\u003e\n\u003cp\u003eComes with hardware needed to mount on the axle.\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: AlSi10Mg\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~14g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-28mm\u003c\/li\u003e\n\u003cli\u003eW-56mm\u003c\/li\u003e\n\u003cli\u003eH-34mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo 4 link my Ascent I used a 2nd driver side upper link, bent 15*, and moved both links to the lowest mount on the chassis side.  Combined with a short outrunner the link and motor jusssssst clear.  \u003c\/p\u003e\n\u003cp\u003eThe Fusion moves the motor down and makes using this all but impossible.  You can try but it won't be easy. Maybe upper links outside the chassis rails...\u003c\/p\u003e\n\u003cp\u003eNot compatible with the Redcat Red diff cover\u003c\/p\u003e\n\u003cp\u003eBlack option is painted with an epoxy based paint\u003c\/p\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Black","offer_id":50285106495803,"sku":"1TN-SOA-Gen9","price":26.99,"currency_code":"USD","in_stock":false},{"title":"Granular Aluminum","offer_id":50399105220923,"sku":null,"price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/products\/IMG_2353-0fb397e.jpeg?v=1710737093"},{"product_id":"1tenth-rear-link-riser-for-redcat-ascent-gen9-axle","title":"1Tenth -  Aluminum LowLife Link Riser for Redcat Ascent \/ Gen9 Axle","description":"\u003cp\u003e1Tenth - Rear Link Riser for Redcat Ascent \/ Gen9 Axle.\u003c\/p\u003e\n\u003cp\u003eWhen you need to dial in your rear suspension and need more link mount options I have you covered!\u003c\/p\u003e\n\u003cp\u003eSecuring on the front and back of the axle there will be zero wiggle for a tight rear end. Made from aluminum so it's light and strong.\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: AlSi10Mg\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~10g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-28mm\u003c\/li\u003e\n\u003cli\u003eW-37mm\u003c\/li\u003e\n\u003cli\u003eH-29mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eComes with all hardware required to install on the axle. Intended for experienced builders\u003c\/p\u003e\n\u003cp\u003eMade from AlSi10MG using DMLS 3D Printing (lasers and metal powder).  There maybe minor imperfections in surface finish from manufacturing and\/or post processing.\u003c\/p\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Black","offer_id":50449490706747,"sku":"1TN-LnkRsr-Gen9","price":18.99,"currency_code":"USD","in_stock":true},{"title":"Granular Aluminum","offer_id":50449490739515,"sku":"1TN-LnkRsr-Gen10","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/files\/IMG-9473.heic?v=1761582979"},{"product_id":"1tenth-servo-on-axle-mount-redcat-ascent-slash-gen9-axle","title":"BOCO RC- Steel SOA for Redcat Ascent \/ Gen9 Portal Axles","description":"\u003cstyle\u003e\na {\n    text-decoration: none;\n    color: #464feb;\n}\ntr th, tr td {\n    border: 1px solid #e6e6e6;\n}\ntr th {\n    background-color: #f5f5f5;\n}\n\u003c\/style\u003e\n\u003cdiv\u003e\n\u003cp\u003eWHAT IT IS\u003cbr\u003eA stainless steel SOA (Servo On Axle) and 4-link adapter for the Redcat \u003cbr\u003eAscent and Gen9 axles. Holds the servo on the axle and provides the \u003cbr\u003eupper link mounting points — eliminating the bump steer inherent in \u003cbr\u003e3-link + panhard suspension setups.\u003c\/p\u003e\n\u003cp\u003eWHY YOU WANT IT\u003cbr\u003eRedcat improved bump steer on the Gen9 and Ascent but it's still there \u003cbr\u003e— and it always will be with a 3-link and panhard. Going to 4-link \u003cbr\u003esolves it. This part gets you up hills quicker than CMS rigs and adds \u003cbr\u003ea good chunk of low-CG weight. Built from steel so it'll probably \u003cbr\u003eoutlast any other part of the truck.\u003c\/p\u003e\n\u003cp\u003eCOMPATIBILITY\u003cbr\u003e- Axle: Redcat Gen9, Redcat Ascent\u003cbr\u003e- Chassis\/Rig: Stock Ascent and Gen9 with factory forward-motor layout\u003cbr\u003e- Servo Size: Standard\u003cbr\u003e- Hardware: Mounting hardware included; reuses stock link mounts\u003cbr\u003e- Does NOT fit:\u003cbr\u003e  - Red diff cover (clearance issue)\u003cbr\u003e  - Fusion Ascent (motor moved lower — not feasible without major \u003cbr\u003e    custom work; no returns accepted for Fusion buyers attempting fitment)\u003c\/p\u003e\n\u003cp\u003eINSTALLATION NOTES\u003cbr\u003eThis is a DIY-type part — some custom work or additional parts are \u003cbr\u003erequired to fully 4-link the Ascent with the factory forward motor:\u003cbr\u003e- Upper links should be moved to the lowest mounting position\u003cbr\u003e- Approximately 15° bend in the links\u003cbr\u003e- Link length approximately 93mm eye-to-eye\u003cbr\u003e- A second factory driver-side link can be bent to shape as a fast \u003cbr\u003e  workaround\u003cbr\u003e- Motor clearance is the biggest hurdle — recommend a small outrunner \u003cbr\u003e  motor to clear everything cleanly\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: 316l Stainless\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~55g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-28mm\u003c\/li\u003e\n\u003cli\u003eW-56mm\u003c\/li\u003e\n\u003cli\u003eH-34mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWHAT'S IN THE BOX\u003cbr\u003e- SOA \u0026amp; 4-link adapter\u003cbr\u003e- Mounting hardware\u003c\/p\u003e\n\u003cp\u003eWARRANTY\u003cbr\u003eLifetime warranty against cracks or breaks\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BOCO RC","offers":[{"title":"Granular Steel","offer_id":50467395928379,"sku":"BOCO-Ascent-SOA-1","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":50467395961147,"sku":"BOCO-Ascent-SOA-2","price":35.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/products\/421587029_1042188250303355_1228161616748604076.jpg?v=1710472337"},{"product_id":"1tenth-aluminum-redcat-gen9-ascent-bumper-mount","title":"1Tenth - Aluminum Bumper Mount for Redcat Ascent","description":"\u003cp\u003eThis bumper mount and chassis brace provides all the clearance you need to do a 4 Link with SOA setup.  The stock brace\/mount will hit the servo and once enough is cutout it's not very sturdy.\u003c\/p\u003e\n\u003cp\u003eCompatible with OEM and 1Tenth Gen9\/Ascent bumpers.\u003c\/p\u003e\n\u003cp\u003eCan be used in the front or rear of the chassis but does not have the pivot mount for the front.\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: AlSi10Mg\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~13g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-20mm\u003c\/li\u003e\n\u003cli\u003eW-70mm\u003c\/li\u003e\n\u003cli\u003eH-16mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Default Title","offer_id":49513191735611,"sku":"","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/files\/IMG_5533.jpg?v=1727134654"},{"product_id":"1tenth-aluminum-redcat-ascent-bumper-mount-w-tilt","title":"1Tenth - Aluminum Bumper Mount w\/ Tilt for Redcat Ascent","description":"\u003cp\u003eThis bumper mount and chassis brace provides all the clearance you need to do a 4 Link with SOA setup.  The stock brace\/mount will hit the servo and once enough is cutout it's not very sturdy.\u003c\/p\u003e\n\u003cp\u003eCompatible with OEM and 1Tenth Gen9 bumpers.\u003c\/p\u003e\n\u003cp\u003eDesigned for the front of the chassis but technically fits the rear as well if you want to get creative with something.\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: AlSi10Mg\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~18g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-32mm\u003c\/li\u003e\n\u003cli\u003eW-70mm\u003c\/li\u003e\n\u003cli\u003eH-26mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Default Title","offer_id":49513193111867,"sku":null,"price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/files\/IMG_5537.jpg?v=1727135057"},{"product_id":"1tenth-tall-boy-rear-link-riser-for-redcat-ascent-gen9-axle","title":"1Tenth - Aluminum TallBoy Rear Link Riser for Redcat Ascent \/ Gen9 Axle","description":"\u003cp\u003e1Tenth - TallBoy Rear Link Riser for Redcat Ascent \/ Gen9 Axle\u003c\/p\u003e\n\u003cp\u003eWhen you want a bunch of options to dial in your rear suspension I have you covered!   Big tires, longer links, or just learning this link riser provides a ton of options.\u003c\/p\u003e\n\u003cp\u003eSecuring on the front and back of the axle there will be zero wiggle for a tight rear end.\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: AlSi10MG\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~11g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-27mm\u003c\/li\u003e\n\u003cli\u003eW-37mm\u003c\/li\u003e\n\u003cli\u003eH-27mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eComes with all hardware required to install on the axle. Intended for experienced builders\u003c\/p\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Black","offer_id":50449463640379,"sku":null,"price":19.99,"currency_code":"USD","in_stock":false},{"title":"Granular Aluminum","offer_id":50449463673147,"sku":null,"price":18.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/files\/IMG_6889.jpg?v=1735597612"},{"product_id":"boco-rc-steel-hd-soa-mount-for-redcat-vertex-6","title":"BOCO RC - Steel HD SOA for Redcat Vertex 6","description":"\u003cp\u003eMade from 316L stainless steel it'll likely outlast the rig itself.  Weighing in at about 155g,  it'll add a good chunk of weight down low to help keep the axle planted.\u003c\/p\u003e\n\u003cp\u003eUses stock hardware to mount on the axle.\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: 316L Stainless Steel\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~155g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-36mm\u003c\/li\u003e\n\u003cli\u003eW-82mm\u003c\/li\u003e\n\u003cli\u003eH-39mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll BOCO RC products are manufactured using DMLS (laser 3D printing) and may have minor surface imperfections from manufacturing or post processing.\u003c\/p\u003e\n\u003cp\u003eAll BOCO RC servo mounts come with a lifetime warranty against cracks and breaks.\u003cimg\u003e\u003c\/p\u003e","brand":"BOCO RC","offers":[{"title":"Default Title","offer_id":50661963366715,"sku":"BC-HD316L-SOA-VERTEX6","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/files\/IMG-9406.heic?v=1782786412"},{"product_id":"boco-rc-aluminum-light-weight-soa-mount-for-redcat-vertex-6-copy","title":"BOCO RC - Aluminum Light Weight SOA Mount for Redcat Vertex 6","description":"\u003cp\u003eMade from aluminum it'll add rigidity to the steering without changing to weight balance too much. \u003c\/p\u003e\n\u003cp\u003eWeighs about 20g more than stock\u003c\/p\u003e\n\u003cp\u003eUses stock hardware to mount on the axle\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: AlSi10MG\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~38g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-36mm\u003c\/li\u003e\n\u003cli\u003eW-82mm\u003c\/li\u003e\n\u003cli\u003eH-39mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll BOCO RC mounts are manufactured using DMLS (laser 3D printing) and may have minor surface imperfections from manufacturing or post processing.\u003c\/p\u003e\n\u003cp\u003eAll BOCO RC Mounts come with a lifetime warranty against cracks and breaks.\u003c\/p\u003e\n\u003cp\u003e\u003cimg\u003e\u003c\/p\u003e","brand":"BOCO RC","offers":[{"title":"Default Title","offer_id":50661964448059,"sku":"BC-LWALSOA-VERTEX6","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/files\/bocovertexalsoa.jpg?v=1760622378"},{"product_id":"1tenth-aluminum-bumper-for-redcat-ascent","title":"1Tenth - Aluminum Bumper for Redcat Ascent","description":"\u003cp\u003eMinimalist triple bar design for maximum performance.  Can be mounted in OEM or 1Tenth bumper mount. \u003c\/p\u003e\n\u003cp\u003eWorks with body flip design no problems, like stock but better.  Can be used in front or rear.\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: AlSi10MG\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~28g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-32mm\u003c\/li\u003e\n\u003cli\u003eW-102mm\u003c\/li\u003e\n\u003cli\u003eH-15mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Default Title","offer_id":50680462639419,"sku":null,"price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/files\/IMG-9468.heic?v=1761580448"},{"product_id":"copy-1tenth-aluminum-bumper-for-redcat-ascent","title":"1Tenth - Aluminum Bumper V2 for Redcat Ascent","description":"\u003cp\u003eA little less minimalist design this one incorporates some winching and recovery goodies.  Can be mounted in OEM or 1Tenth bumper mount. \u003c\/p\u003e\n\u003cp\u003eAddition of the fairlead hinders the flip body a little but some trimming or heat assisted fitment can resolve that.  \u003c\/p\u003e\n\u003cp\u003eBumper Only - no hooks or rings included\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: AlSi10MG\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~29g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-36mm\u003c\/li\u003e\n\u003cli\u003eW-103mm\u003c\/li\u003e\n\u003cli\u003eH-22mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBlack is an epoxy based paint.  Easy touch up for scratches.\u003c\/p\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Black","offer_id":50680472535355,"sku":null,"price":31.99,"currency_code":"USD","in_stock":false},{"title":"Granular Aluminum","offer_id":50680472568123,"sku":null,"price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/files\/IMG-9469.heic?v=1761580872"},{"product_id":"1tenth-aluminum-bumper-v3-for-redcat-ascent","title":"1Tenth - Aluminum Bumper V3 for Redcat Ascent","description":"\u003cp\u003e1Tenth Aluminum bumper v3 for Redcat Ascent. Fairlead and a stinger on this one gives your rig that custom look and keeps it light.  \u003c\/p\u003e\n\u003cp\u003eDoes not work with body flip design.  Can still sort of get to batteries and some interior but not a full flip up.\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: AlSi10MG\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~34g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-33mm\u003c\/li\u003e\n\u003cli\u003eW-103mm\u003c\/li\u003e\n\u003cli\u003eH-54mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"1Tenth Scale RC","offers":[{"title":"Default Title","offer_id":50680474304827,"sku":null,"price":34.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/files\/IMG-9458.heic?v=1761581639"},{"product_id":"boco-rc-steel-soa-mount-for-redcat-vertex-6","title":"BOCO RC - Steel SOA Mount for Redcat Vertex 6","description":"\u003cp\u003eMade from 316L stainless steel it'll likely outlast the rig itself.  Weighing in at about 105 grams it’s not as heavy as the HD, but it'll still add a good chunk of weight down low to help keep the axle planted.\u003c\/p\u003e\n\u003cp\u003eUses stock hardware to mount on the axle.\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: 316l Stainless\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~108g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-36mm\u003c\/li\u003e\n\u003cli\u003eW-82mm\u003c\/li\u003e\n\u003cli\u003eH-39mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll BOCO RC products are manufactured using DMLS (laser 3D printing) and may have minor surface imperfections from manufacturing or post processing.\u003c\/p\u003e\n\u003cp\u003eAll BOCO RC servo mounts come with a lifetime warranty against cracks and breaks.\u003c\/p\u003e\n\u003cp\u003e\u003cimg\u003e\u003c\/p\u003e","brand":"BOCO RC","offers":[{"title":"Default Title","offer_id":50698529931579,"sku":"BC-316L-SOA-VERTEX6","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/files\/IMG-9537.heic?v=1762196366"},{"product_id":"boco-rc-aluminum-soa-mount-for-redcat-vertex-6","title":"BOCO RC - Aluminum SOA Mount for Redcat Vertex 6","description":"\u003cp\u003eMade from aluminum it'll add rigidity to the steering without changing to weight balance too much. \u003c\/p\u003e\n\u003cp\u003eWeighs a bit more than the light weight version and stock but won’t impact weight balance much.\u003c\/p\u003e\n\u003cp\u003eUses stock hardware to mount on the axle\u003c\/p\u003e\n\u003cp\u003eAll BOCO RC products are manufactured using DMLS (laser 3D printing) and may have minor surface imperfections from manufacturing or post processing.\u003c\/p\u003e\n\u003cp\u003eAll BOCO RC servo mounts come with a lifetime warranty against cracks and breaks.\u003c\/p\u003e\n\u003cp\u003eMATERIAL \u0026amp; CONSTRUCTION\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: AlSi10MG\u003c\/li\u003e\n\u003cli\u003eManufacturing: DMLS or SLS additive\u003c\/li\u003e\n\u003cli\u003eFinish: Flat semi granular\u003c\/li\u003e\n\u003cli\u003eWeight: ~55g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-36mm\u003c\/li\u003e\n\u003cli\u003eW-82mm\u003c\/li\u003e\n\u003cli\u003eH-39mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg\u003e\u003c\/p\u003e","brand":"BOCO RC","offers":[{"title":"Default Title","offer_id":50698536747323,"sku":"BC-AL-SOA-VERTEX6","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/7073\/5419\/files\/IMG-9536.heic?v=1762226698"}],"url":"https:\/\/1tenth.com\/collections\/redcat.oembed?page=2","provider":"1Tenth Scale RC","version":"1.0","type":"link"}