My Store
1Tenth - Aluminum BTA Servo Mount and 4 Link Adapter for Vanquish F10 Portal
1Tenth - Aluminum BTA Servo Mount and 4 Link Adapter for Vanquish F10 Portal
Couldn't load pickup availability
1Tenth Aluminum BTA Mount for Vanquish F10
The original aluminum BTA mount for the F10. This was designed for use on lightweight setups and servos with moderate power. It wont add a lot of weight to your rig if you've already got some other brass bits.
Compared to the OG of BTA mounts from BOCO this one positions the servo 2MM higher and 1.9MM farther back. It still utilizes the existing 3 link mount and a screw on the back of the pumpkin for mounting on the axle. Adding a 2nd upper link spot. for a 4 link setup. This mount hugs the truss close, ensuring stability with only 2 screws.
2nd place in reliability only to the BOCO mount. People were buying these to replace broken VP BTA mounts.
All necessary hardware included to mount on the axle
This mount CAN fit the composite straight axle if you sand down the nub on top of the housing.
If you want a raw aluminum look you can use a wirewheel or other light abrasive to take away the top granular layer.
NOT INTENDED FOR A STOCK VS410 setup. Experienced builders on custom rigs. Fits composite axle only. Can be made to fit others with dremel work but by default only the composite portal.
Black option is painted and durable enough for a servo mount. If you want a more durable or custom coloring I'd suggest the raw version and powder or Cerakote.
Share



