1Tenth - Back wall with shock mounts for chopped chassis with raises center
When you want the lightest chassis or just like the chopped look this piece will get you there
Designed to let you mount the shocks to the back wall and I also raised the center about 8mm to give more room for the driveshaft on drooped rigs.
Factory screws works up top and in the middle but you'll need some shorter screws for the lower portion. M3x8MM ideally but 10MM can work if you don't crank em down.
You have to chop the back of the chassis off and install this in place of the stock brace.
Made in the USA using Nylon and laser sintering printers.
