The original F10 BTA mount and undisputed king of reliability. Hundreds sold with ZERO warranty claims. The epitome of Buy Once Cry Once.
This mount hugs the truss on 3 sides and uses the existing 3-link mount plus one of the M3 screws on the back of the pumpkin to secure to the axle. The mount was designed to get the servo as low as possible and add a little extra weight down low.
You may need to space tall servos up a bit. Drag link setup will need to be custom, going to driver side easier but long horn can make passenger side easier.
Comes with all hardware needed to mount on the axle.
This mount CAN fit the composite straight axle if you sand down the nub on top of the housing.
NOT INTENDED FOR A STOCK VS410 setup. Experienced builders on custom rigs.
If you want a raw steel look you can use a wire wheel or other light abrasive to remove the top granular layer. Black option is an epoxy based paint and durable enough for a servo mount. If you want a more durable coating like powder or Cerakote I'd suggest the raw version and sending it off.
All BOCO RC Servo Mounts are manufactured from 316l stainless steel using DMLS or SLS additive manufacturing and come with a lifetime warranty against cracks or breaks.
