1Tenth -Aluminum 3 Gear Transmission Adapter for Ryft

If you're doing a custom Ryft build and don't want to use the stock Ryft transmission, this is what you need.

NOT INTENDED FOR A STOCK BUILD This plate braces off multiple factory screw holes, uses one factory screw hole for the transmission itself, and sits snugly inside the factory Ryft skid. 

You'll need to clearance one small spot on the skid for one of the transmission screws.

1 Screw goes through the skid, through the plate, and into the transmission.  3 other screws secure the trans to plate. 

MATERIAL & CONSTRUCTION

• Material: AlSi10Mg
• Manufactring: DMLS or SLS additive
• Finish: Flat semi granular
• Weight: ~12g

Dimensions

• L-43mm
• W-60mm
• H-5mm

The rest of the screw holes secure the plate to the skid nice and tight. Manufactured from aluminum