1Tenth- High Clearance Rear Brace with Fuel Cell for Axial Ryft

When you want to get low with the Ryft lots of chassis parts get in the way. The rear brace and the fuel cell being one of those pieces. I raised it up as much as we could at the back of the chassis and shrunk the fuel cell a good bit. After that I figured might as well add some limit strap mounts. The fuel cell is big enough for the stock. Similar to the HD version (pictured with it) but less pipes for less $$. Lid will be attached to fuel cell and need to be cut off, like treed parts. Small white/grey dots may be present after cutting. Sharpie can fix it. If you're full send 24x7x365 Id suggest the HD version which is shown next to standard You'll need - 3 x M3x6 for lid 6 x M3x12 for limit strap mounts (2X minimum but all spots filled is strongest. Snug, then half a turn) 2 x M3x10 for rear cage to brace Made in the USA using Nylon 12 on HP Multijet Fusion