BOCO RC- Steel Servo on Axle Mount Redcat Ascent / Gen9 Axle. Does not fit the Fusion Ascent.

BOCO- Servo on Axle Mount and 4 Link Adapter for Redcat Ascent/Gen9 Axle Redcat did make some improvements to bump steer on the Gen9 and Ascent but it's still there, as it always will be with a 3 link and panhard. That's why 4 link is so much better.

So here is the servo mount to get you up the hills quicker than the CMS rigs. Manufactured from steel so it'll probably outlast any other part of the truck and add a good chunk of weight down low. Comes with hardware needed to mount on the axle.

To 4 Link the ascent with the factory forward motor you'll need to do a little work. To accomplish I moved the upper links to the lowest spot, did a 15* bend, and ~93MM eye to eye link. Buying a second factory driver side link can work fine if you bend it to shape.

The Fusion Ascent moved the motor lower and it gets in the way of hopes of 4 linking without some serious creativity.  Links outside the chassis may work...  It will not be as easy as 4 linking the regular Ascent or Gen9.

Not compatible with the Red diff cover

This is a DIY type part with some custom work or parts needed