Servo On Axle and 4 Link adapter for Redcat XR247 axles is manufactured from Nylon 12 using Selective Laser Sintering
While not as bad as the Gen8 axles the 3 link geometry isn't ideal on the XR247s. Eliminate bump steer and axle sway all while improving center of gravity.
Comes with M3 screw to secure upper links. You'll need a 2mm longer screw on passenger side of the truss and a M3x~6MM to secure SOA on driver side of truss.
MUST make a hole for the screw on the top driver side of truss. Install truss loosely to use as template for hole.
