1Tenth LowLife SOA and 4 Link adapter for Axial SCX10III AR45 Straight Axle is made from Nylon 12 using selective laser sintering.
The goal of this mount was to get the servo as low as possible on the axle. This will make it a more custom install thank the Tallboy. The mounting and link positions are the same as TallBoy but the servo sits about 8mm lower and 5mm farther forward - just enough for centered link ends.
MATERIAL & CONSTRUCTION
Material: PA12
Manufacturing: SLS additive
Finish: Flat semi granular
Weight: ~16g
Dimensions
L-56mm
W-24mm
H-32mm
You'll need custom drag and/or tie rods to get full throw.
