BOCO RC - Steel SOA and 4 Link Converter for VP F10 Portal Axle

BOCO RC - Steel SOA and 4 Link Converter for VP F10 Portal Axle

This design can still utilize the same link mount spots as the BTA and Aluminum SOA version but also incorporates a center triangulated option.  Low Profile servo will give more room for the links but not mandatory.

Vanquish designed what is arguably the nicest 1/10 scale portal axle on the market, but..... It's 3 link. I can forgive them since scale is the rage :) But we all know function > form.

Vanquish nailed the geometry for minimal bump steer but it's still there. I'm pretty confident that Vanquish engineers know link geometry better than me so I stuck with their upper link position and just added a 2nd mount on the driver side.

The mount form fits the truss, braces off the existing 3-link mount, and uses one of the screws on the back of the diff to secure to the axle. Mount can fit the composite straight axle f10 if you sand the nub on top of the truss down.

All necessary hardware is included to mount on the axle.

NOT INTENDED FOR A STOCK SETUP.

Intended for experienced builders on custom rigs.

Can fit the straight axle fine if you sand down the nub on top of the truss