This piece allows you to mount a servo as low as possible on the Redcat V1 or V2 Portal axle and convert over to a 4 Link setup to totally eliminate bump steer and axle sway. It slips over the top of the pumpkin and uses the front diff cover screws for bracing as well as the link mount on the diff. Manufactured from Stainless Steel it'll easily outlast the rest of your rig. If you want a raw stainless look you can use a wirewheel or other light abrasive to remove the top granular layer. Includes hardware required for installation on the axle. You'll need to provide a 2nd upper link.
