BOCO - Stainless Truss with Servo Mount for Redcat V2 Portals When you want to 4 link and make your Redcat portals as strong as possible I have you covered. Form fit design with 3 mount points will make your axle housing stout. The extra ~40g will help a lot lowering center of gravity. Not intended for stock chassis. It can be done but is a bit of work. Technically fits Treal housing but shock mounts on Treal housing aren't pass through for the grub screw, will need to be drilled. Comes with necessary hardware to mount on the axle. You'll need some screws and nuts for the actual servo. Manufactured from Stainless Steel it'll easily outlast the rest of your rig. If you want a raw stainless look you can use a wirewheel or other light abrasive to remove the top granular layer.
