1Tenth - Aluminum SOA for Redcat Gen8 / Gen7 Portals V1 or V2

Servo On Axle and 4 link adapter for Gen 7 and Gen 8 Portal Axles.  Fits V1 and V2

If you're sick of bump steer and axle sway with the 3 link panhard setup this is for you!  Slips right on top of the pumpkin and uses 3 of the diff cover screws to secure it.

MATERIAL & CONSTRUCTION

• Material: AlSi10Mg
• Manufacturing: DMLS or SLS additive
• Finish: Flat semi granular
• Weight: ~13g

Dimensions

• L-30mm
• W-56mm
• H-34mm

Not intended for use on stock chassis Gen8 as the motor gets in the way and there's no provisions for a 2nd upper front link on the chassis side. It HAS been done but not an easy bolt on affair. Intended for light to medium weight rigs with moderate power servos.

Easy bolt on for Gen7 and most aftermarket flat rail chassis.

Includes hardware to mount on the axle. You'll need some screws for the actual servo.